The use of car GPS locator is very wide, especially for the auto financial risk control industry, I believe many people know it. But some people still ask: Is it right to install the GPS locator on the car and start using it right away? If you do this, you will find that it won't work.
In fact, after the car is installed with a GPS locator, activating the GPS locator is another important step. For many novices, they do not know how to activate and use the car GPS tracker. Then the editor will talk about how the general GPS tracker is activated.
How to use the car GPS tracker after installation?
First of all, we all know that GPS positioning terminals are mainly divided into wired GPS locators, wireless GPS locators and OBD interface locators. The wireless GPS locator is relatively simple to install, just find a place in the car to hide the device.
The installation method of wired locator and wireless locator is a little different. The wired locator needs to be connected to the vehicle power supply so that it can work continuously for 24 hours without power. The wireless locator is usually fully charged once, and the number of standby and use days can be determined according to the battery size and positioning frequency of the locator.
After installing the device, go down and install the card for the device. The function of the card is to provide network transmission for the device, so that the device can transmit information to the station to transmit information.
Whether it is a wired locator or a wireless locator, the steps to install the SIM card are usually as follows:
①Open the back cover of the locator or the SIM card slot plug of the locator; ②Insert the card correctly according to the card picture on the locator; ③Close the back cover or the card slot plug.
After the SIM card is installed, the locator is powered on, and the wiring locator finds the positive and negative poles of the car power supply. The negative electrode is easy to find. The place where the body is grounded is the negative electrode. The positive electrode is found in the safe, near the car key switch, or directly connected to the battery. Of course, it is best to find professional technicians who understand automotive circuits to install!
But it is best to connect to normal electricity, that is, not affected by the car's key switch, and the power cord directly drawn from the car battery; the side of the locator with the light should face the sky, and the side facing the sky should not be close to the metal object to block the internal GPS antenna. It also has to receive signals from 20,000 kilometers away.
All in all, the activation method of the car GPS tracker is divided into three steps: 1. Install the SIM card; 2. Turn on the power of the tracker and turn on the switch; 3. Take the vehicle or the tracker out of the open for a period of time, the car GPS tracker It can be activated and used.
Wide Voltage GPS Tracking Device is your good choice.